60MHZ Signal Generator with Digital Control


  Ask a Question


  • Item Type: Generator
  • Display Size: 3 – 4.9 inch
  • Size: 195 x 175 x 70 mm / 7.68 x 6.89 x 2.76 inch

Package Includes:

  • 1 x Pc
Frequency Characteristics
Sine frequency range0~15MHz0~30MHz0~40MHz0~50MHz0~60MHz
Square frequency range0~15MHz0~15MHz0~15MHz0~15MHz0~15MHz
Triangle frequency range0~15MHz0~15MHz0~15MHz0~15MHz0~15MHz
Pulse frequency range0~6MHz0~6MHz0~6MHz0~6MHz0~6MHz
CMOS/TTL digital frequency range0~6MHz0~6MHz0~6MHz0~6MHz0~6MHz
Arbitrary wave frequency range0~6MHz0~6MHz0~6MHz0~6MHz0~6MHz
Square rise time≤30nS≤25nS≤20nS≤20nS≤20nS
Mininum Frequency resolution0.01µHz(0.00000001Hz)
Frequency accuracy±20ppm
Frequency stability±1ppm/3h
Waveform Characteristics
WaveformSine, Square, Triangle, Pulse (duty-cycle correction),Partia Sine, CMOS, DC level, Half-wave, Full-Wave, Pos-Ladder, Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, Sinc Pulse, Lorentz Pulse, and 60 kinds user defined waveform.
Waveform length2048 points
Waveform sampling rateJDS6600-15MJDS6600-30MJDS6600-40MJDS6600-50MJDS6600-60M
Waveform vertical resolution12 bits
SineHarmonic suppression≥45dBc(<1MHz); ≥40dBc(1MHz~20MHz)
Total harmonic distortion<0.8%(20Hz~20kHz,0dBm)
Square and PulseOvershoot (Square)≤5%
Duty-cycle range(Pulse)0.1%~99.9%
Ramp waveLinearity≥98%(0.01Hz~10kHz)
Output Characteristics
Amplitude rangeJDS6600-15MJDS6600-30MJDS6600-40MJDS6600-50MJDS6600-60M
≤10MHz: 2mVpp ~ 20Vpp ≤15MHZ: 2mVpp ~ 10Vpp≤10MHz: 2mVpp ~ 20Vpp ≤30MHZ: 2mVpp ~ 10Vpp≤10MHz: 2mVpp ~ 20Vpp ≤30MHZ: 2mVpp ~ 10Vpp ≤60MHZ: 2mVpp ~ 5Vpp
Amplitude resolution1mV
Amplitude stability±0.5%/5 h
Amplitude flatness±5%(<10MHz); ±10%(>10MHz)
Waveform Output
Output impedance50Ω±10%(typical)
ProtectionAll the signal output termianl can be shorted within 60s
DC Offset
Offset adjusting rangeOutput Amplitude >2V0.2V<Output Amplitude≤2V0<Output Amplitude≤0.2V
Offset resolution0.01 V
Phase characteristics
Phase adjusting range0~359.9°
Phase resolution0.1°
Low level<0.3V
High level1V~10V
Level rise/fall time≤20ns
External Measurement Function
Frequency meter functionFrequency measurement range1Hz~100MHz
Measurement accuracyGate time continuously adjusted between0.01s~10s
Counter functionCounting region0-4294967295
Coupled mode2kinds Coupling modes, DC and AC
Control modeManual operation
Input signal voltage range2Vpp~20Vpp
Pulse width measurement0.01us (resolution), 20s (MAX measuring time)
Period measurement0.01us (resolution), 20s (MAX measuring time)
Sweep Function
Sweep channelCH1 or CH2
Sweep typelinear sweep、log sweep
Sweep time0.1s~999.9s
Setting rangeUser settings
Sweep directionForward, Backward and Roundtrip
Burst function
Number of pulses1-1048575
Burst modeManual Trig、CH2 Trig、Ext.Tring(AC) 、Ext.Tring(DC)
General technical parameters
DisplayDisplay type2.4 inch TFT color LCD
Storage and loadingQuantity100 groups
Location00 to 99(Power on will load the position 00)
Arbitrary wavequantity1 to 60, totally 60 groups(default set 15 groups)
InterfaceInterface modeUSB to serial interface
Extension interface –There is serial interface of TTL level mode to be convenient for user development.
Communication speed115200bps
communication protocolCommand-line mode, Open protocol
Power supplyVoltage rangeDC5V±0.5V
Manufacturing processSurface-mount technology, FPGA design, high reliability, long service life
BuzzerUser can set ON or OFF by procedure
Operating characteristicsFull button operation, knob continuous adjustment
Environmental conditionsTemperature:0~40 oCHumidity:<80%

60MHZ Signal Generator with Digital Control60MHZ Signal Generator with Digital Control60MHZ Signal Generator with Digital Control


There are no reviews yet.

Be the first to review “60MHZ Signal Generator with Digital Control”

Your email address will not be published. Required fields are marked *

General Inquiries

There are no inquiries yet.